How to Scrape Stickers in CS2
The scrape mechanic, how much wear each step adds, and the stickers you should never touch
Open your inventory, select the weapon, hit Inspect, click the sticker and use Scrape Sticker — CS2 wears it down step by step, and you can preview each stage before committing. It is permanent: there is no undo and you can never fully remove a sticker, only wear it toward a faded, scratched look. Scrape cheap stickers for aesthetics; leave rare or expensive ones pristine, because scraping tanks their value the instant you do it.
Sticker scraping is one of those CS2 features people discover by accident and then panic about — usually right after wearing down a sticker they meant to keep. It is worth understanding before you click anything, because unlike almost everything else in your inventory, a scrape can never be undone. This guide covers exactly how the mechanic works, what each scrape does to the sticker, and the one rule that keeps you from destroying value: know which stickers to scrape and which to leave alone.
How scraping works, step by step
Scraping in CS2 lives in the inspect view, not a separate menu:
- Open your inventory in the CS2 main menu and select the weapon that has the sticker on it.
- Click Inspect to bring up the 3D model where the stickers are applied.
- Select the sticker you want to wear down. A gun can hold up to four, and each is scraped independently.
- Use the Scrape Sticker control. Each scrape advances the wear one step, gradually degrading the design. CS2 lets you scrape incrementally and preview the look at each stage before you lock it in.
That preview step is the important safety net — you can see the faded result before committing, so there is no excuse for a surprise. Take your time with it.
How much wear each scrape adds
A sticker's wear runs from 0% (pristine, freshly applied) toward 100% (as worn as it goes), typically across up to ten scrape steps. The visual progression is roughly:
- Light scrapes (early steps): the sticker looks scratched and a little vintage — edges roughened, colors slightly dulled. Popular for a "used gun" aesthetic without losing the design.
- Medium scrapes: chunks of the sticker are visibly gone; the design reads as heavily damaged but still recognizable.
- Heavy scrapes (final steps): only outlines and fragments remain. This is the look people go for when they want a sticker barely there — a ghost of a logo peeking through.
Crucially, a sticker never disappears entirely and can never be peeled off. Even fully scraped, a faint remnant stays on the weapon. If you want the gun clean, scraping is not the answer — you would need a version of the skin without that sticker applied.
Which stickers to scrape — and which to never touch
This is where money is made or lost. Scraping is purely cosmetic, but it has a hard financial consequence: the moment you scrape a sticker, its market value drops, and it never recovers. A pristine sticker is worth more than any scraped version of the same sticker, full stop.
- Never scrape rare or expensive stickers. Holo, foil, gold, and sought-after tournament stickers — especially older Katowice-era pieces — carry serious value because they are pristine. Scraping one can wipe out most of its worth in a single click. If a sticker is worth real money, leave it at 0%.
- Scrape cheap stickers freely — for looks only. A common paper sticker worth a few cents costs you nothing to wear down, so if a scratched or nearly gone look suits the skin, go for it.
- Match the wear to the skin. Scraped stickers pair naturally with Field-Tested and Battle-Scarred skins, where a pristine sticker can look out of place on a beaten-up gun. It is a legitimate craft choice — just make it on stickers you can afford to sacrifice.
The one-line rule: scrape for aesthetics on cheap stickers, never for value on rare ones. If you are unsure what a sticker is worth before you touch it, check current prices on our CS2 stickers database — a two-minute look can save you from a permanent mistake.
A note on sticker crafts
"Crafting" a skin — deliberately placing and scraping stickers to create a unique look — is a whole hobby within CS2, and scraping is half the toolkit. A well-judged scrape job on the right skin can even make a craft more desirable to collectors. But that is a game of taste played with cheap-to-mid stickers, not a reason to take a scraper to your Katowice holos. Learn the mechanic on throwaway stickers first, and keep the valuable ones exactly as they came.
Frequently Asked Questions
- How do you scrape a sticker in CS2?
- Open your inventory in CS2, select the weapon, click Inspect, then click the sticker and use the Scrape Sticker control. Each scrape wears the sticker down a step; CS2 lets you scrape gradually and preview the result before you commit.
- How much wear does each sticker scrape add?
- A sticker goes from 0% (pristine) toward 100% (fully worn), typically over up to ten scrape steps. Early scrapes give a light scratched look; later scrapes strip the sticker down to fragments and outlines. CS2 lets you stop at any point and preview each stage.
- Can you undo a sticker scrape in CS2?
- No. Scraping is permanent — there is no way to restore wear once it is removed, and the sticker cannot be peeled off the weapon either. Because value drops the instant you scrape a rare sticker, only scrape when you are certain about the look you want.
- Should I scrape my stickers or leave them?
- Leave expensive or rare stickers pristine — scraping tanks their market value immediately. Scrape cheap stickers only for the aesthetic, when a partially worn or nearly gone look suits the skin. As a rule: scrape for looks on cheap stickers, never for value.