CS2 eDPI Calculator
Your eDPI (effective dots per inch) is the single number that defines how fast your crosshair moves. Calculate yours below and compare it to the pros.
Calculate Your eDPI
Your CS2 eDPI
Medium — Balanced for most playstyles
eDPI Sensitivity Ranges
Where does your eDPI fall on the spectrum? Here's how different ranges affect your gameplay:
| Classification | eDPI Range | Playstyle |
|---|---|---|
| Very Low | < 400 | Precision AWPing, slow methodical play |
| Low | 400–700 | Precision rifling, popular among AWPers |
| Medium | 700–1000 | Balanced for most playstyles, most common pro range |
| High | 1000–1400 | Aggressive entry fragging, fast flick shots |
| Very High | > 1400 | Wrist aiming, rapid 180-degree turns |
Pro Player eDPI Comparison
See how your settings stack up against the world's best CS2 players:
| Player | DPI | Sensitivity | eDPI |
|---|---|---|---|
| s1mple | 400 | 3.09 | 1236 |
| ZywOo | 400 | 1.6 | 640 |
| NiKo | 400 | 1.98 | 792 |
| device | 400 | 1.8 | 720 |
| ropz | 400 | 1.77 | 708 |
| donk | 800 | 0.85 | 680 |
| Twistzz | 400 | 1.7 | 680 |
| broky | 400 | 1.4 | 560 |
| EliGE | 400 | 1.75 | 700 |
| rain | 800 | 1 | 800 |
Understanding eDPI: The Complete Breakdown
Your effective DPI is the product of two independent settings that together determine cursor speed. The formula is straightforward: eDPI = Mouse DPI × In-Game Sensitivity. A player running 400 DPI at 2.0 sensitivity has the same 800 eDPI as someone at 1600 DPI with 0.5 sensitivity — the crosshair moves identically in both configurations.
This matters because comparing raw sensitivity numbers is meaningless without knowing the DPI. When a pro player says they use "2.0 sensitivity," that tells you nothing until you know their DPI. eDPI creates a universal measurement for direct comparison across any hardware setup.
Choosing Your Ideal eDPI
Start around 800 eDPI if you're unsure — it sits right in the middle of the professional range. From there, adjust based on your role and mouse pad size. AWPers and support players tend toward 500–700 eDPI for the precision needed in holding angles, while entry fraggers and aggressive riflers often run 900–1200 eDPI for faster target acquisition during site takes.
Your physical setup also influences the right eDPI. A large mouse pad (45cm+ wide) accommodates lower eDPI with big arm sweeps. A smaller desk setup might require higher eDPI to maintain comfortable 180-degree turns without lifting your mouse. Consider the cm/360 calculator to see exactly how far your mouse needs to travel for a full turn.
DPI Myths Debunked
A common misconception is that 400 DPI is inherently "better" for gaming. In reality, higher DPI settings (800 or 1600) with proportionally lower sensitivity reduce pixel skipping — the phenomenon where your crosshair jumps over pixels because the sensor doesn't report enough positional data. Modern sensors handle high DPI cleanly, so the choice between 400 and 1600 DPI is largely personal preference as long as your eDPI stays the same.
Frequently Asked Questions
- What is eDPI in CS2?
- eDPI stands for effective dots per inch. It combines your mouse DPI and in-game sensitivity into a single number using the formula: eDPI = DPI × In-Game Sensitivity. This lets you compare sensitivity settings across different hardware configurations.
- What is a good eDPI for CS2?
- Most professional CS2 players use an eDPI between 600 and 1200. The average pro eDPI sits around 860. Lower eDPI gives more precision for headshots, while higher eDPI allows faster flick shots and movement.
- What eDPI do CS2 pros use?
- Top professionals vary widely: s1mple uses ~1236 eDPI (400 DPI × 3.09), ZywOo uses ~640 eDPI (400 DPI × 1.6), and NiKo uses ~792 eDPI (400 DPI × 1.98). The pro range spans roughly 400–1600 eDPI.
- Does higher DPI with lower sens give better results?
- Using higher DPI (like 1600) with proportionally lower sensitivity can reduce pixel skipping and provide smoother cursor movement. However, many pros still prefer 400 or 800 DPI out of habit. The eDPI result is what matters for in-game feel.
- How do I convert eDPI between CS2 and Valorant?
- Multiply your CS2 eDPI by 0.314 to get the equivalent Valorant eDPI (or divide Valorant eDPI by 0.314 for CS2). For example, 800 CS2 eDPI ≈ 251 Valorant eDPI.