All CS2/CSGO Commands List
Below is CSDB's searchable list of all CS2 console commands. Each command in our database has in-depth insights on each command, with help and argument details (simply hover over a command to view).
sv_minupdaterate
sv_minupdaterate
<Tickrate>
You enter the command in the control panel, and it simply sets the minimum update rate for the game server. It can be used in conjunction with the sv_mincmdrate command to adjust the server's tick rate, such as to 128 tick.
Name:
Tickrate
Description:
Where tick rate is your desired minimum update rate, for example, 128 ticks per second.
killserver
killserver
This command will shut down the server you are currently in
sv_allowupload
sv_allowupload
<0 / 1>
This command determines whether or not clients are permitted to upload files to the server - usually customization files.
Name:
0 / 1
Description:
Where you set it to 0 to prevent clients from uploading files (default) and set it to 1 to allow them.
sv_allow_votes
sv_allow_votes
<0 / 1>
The following command sets whether or not votes (e.g. timeout votes) are allowed in the game.
Name:
0 / 1
Description:
With the 0 / 1, you need to set it to 0 to disable/disallow players from calling votes and set it to 1 to allow players to start votes.
sv_damage_print_enable
sv_damage_print_enable
<0 / 1 / 2 >
There is only one setting that you can apply with commands for the CS GO show damage in chat feature. In this setting, it is the “Sv_damage_print_enable” command. When you enter this command into the console, you can see all the damage details one by one at the end of the round.
Name:
0 / 1 / 2
Description:
Sv_damage_print enable 0: The value of zero command will completely prevent you from seeing any damage.
Sv_damage_print_enable 1: If you open the console when you activate the command, you can see the relevant damage details after death. This damage detail is only visible at the end of the round.
Sv_damage_print_enable 2: Damage taken and dealt are only shown when the next round is restarted.
Sv_damage_print_enable 1: If you open the console when you activate the command, you can see the relevant damage details after death. This damage detail is only visible at the end of the round.
Sv_damage_print_enable 2: Damage taken and dealt are only shown when the next round is restarted.
sv_wateraccelerate
sv_wateraccelerate
<Value>
Determines the maximum speed players can reach when moving through water in CS2.
Name:
Value
Description:
The exact speed at which players can accelerate whilst underwater.
sv_water_slow_amount
sv_water_slow_amount
<Value>
Allows you to adjust how much players can slow down when moving through water.
Name:
Value
Description:
The value of player movement speed when slowed down in water. The default value is 0.9.
sv_mapvetopickvote_rnd
sv_mapvetopickvote_rnd
<0 / 1>
This command shuffles the order of maps for veto selection in competitive CS2 matches.
Name:
0 / 1
Description:
This command will determine if the shuffling of veto picks map choices. 1 to enable 0 to disable.
sv_mapvetopickvote_maps
sv_mapvetopickvote_maps
<Map List>
Shows the maps designated for map veto selection in competitive matches on your server in CS2.
Name:
Map List
Description:
Each command is a Comma-separated list of map names that can be input veto pick sequence.
sv_human_autojoin_team
sv_human_autojoin_team
<0 / 1>
You determine whether players who come to your server will be automatically placed on a team after joining the game. If you disable the command, players can choose the teams they will be placed on.
Name:
0 / 1
Description:
This will allow players to place human players on a team.
player_competitive_maplist_2v2_10_0_C8D88986
player_competitive_maplist_2v2_10_0_C8D88986
<Map List>
Allows you to set the default map list for 2v2 competitive matches on your server.
Name:
Map List
Description:
A comma-separated list of specific map group names, to include the map list for 2v2 competitive mode.
mp_retake_ct_count
mp_retake_ct_count
You can use this command to set the total number of CTs in CS2 retake game mode.
mp_modify_timeouts
mp_modify_timeouts
<Team>
<Number of Timeouts>
You can change the break times for Ts and CTs. If you want, you can specify less break number and duration for T and more for CT.
Name:
Team
Description:
You can choose which teams timeout are going to be modified either CT or T.
Name:
Number of Timeouts
Description:
The number of timeouts that can be allowed. You can use a specific number or -1 for unlimited timeouts.
sv_guardian_extra_equipment_t
sv_guardian_extra_equipment_t
<0 / 1>
Just like the previous command, you can type this command into the console to set the Terrorists' starting equipment in the guardian game mode.
Name:
0 / 1
Description:
1 to enable, 0 to disable.
sv_guardian_extra_equipment_ct
sv_guardian_extra_equipment_ct
<0 / 1>
If you want CTs to start with extra equipment in the Guardian game mode in CS2, you can enable this command.
Name:
0 / 1
Description:
1 to enable 0 to disable.
mp_fraglimit
mp_fraglimit
<Limit Value>
Determines the maximum number of kills a team or a player can achieve throughout the map a CS2 command.
Name:
Limit Value
Description:
To enable it, you must assign a value other than 0 to the command.
mp_fists_replace_melee
mp_fists_replace_melee
<0 / 1>
With this command, you can set how many enemies CTs should kill in Co-op Terror Hunt mode In CS2.
Name:
0 / 1
Description:
You can choose if fists will replace the melee weapon when dropped in game.
sv_max_deathmatch_respawns_per_tick
sv_max_deathmatch_respawns_per_tick
<Respawns Value>
If you want to determine the number of players spawn per click in CS2 Deathmatch mode, you can customize this command.
Name:
Respawns Value
Description:
The max number of a respawns that can happen within a single tick.
inferno_smoke_volume_density
inferno_smoke_volume_density
This command increases or decreases the smoke density produced by incendiary grenades or molotov cocktails used in the game.
ff_damage_decoy_explosion
ff_damage_decoy_explosion
<0 / 1>
You can use this command if you want the decoy bombs to damage your teammates after they explode. You can set the value to 1 to enable it.
Name:
0 / 1
Description:
This command will allow if decoy can damage all teammates when exploded 1 to enable 0 to disable.
sv_grenade_trajectory_prac_trailtime
sv_grenade_trajectory_prac_trailtime
<Trail Time>
It is a command used to visualize the trajectory of grenades used by players. We especially recommend players who want to practice with grenades to use the command.
Name:
Trail Time
Description:
The duration which is in seconds that the trailtime will be visible for.
cl_sim_grenade_trajectory
cl_sim_grenade_trajectory
<Duration>
This command is perfect if you want to practice with grenades. Players can track the trajectory and movement of the grenades they throw through visualization.
Name:
Duration
Description:
The number of seconds that the grenade trajectory will be visible for.
cash_team_bonus_shorthanded
cash_team_bonus_shorthanded
<Bonus Amount>
If one of the two teams plays with fewer players, the team with fewer players wins a higher cash prize. With this command, you can adjust the reward amount received
Name:
Bonus Amount
Description:
The specific amount of cash that can be given as a bonus.
bot_controllable
bot_controllable
<0 / 1>
Players can control the bots in the game. You must set the value to 1.
Name:
0 / 1
Description:
1 will allow players to control bots. 0 to not allow players to control bots in your server.
Above is CSDB’s searchable list of all CS2 console commands. Each command in our database has in-depth insights on each command, with help and argument details (simply hover over a command to view).
You can type in the name of a specific command to filter that command.
We also have a Command category making it easier for those looking for CSGO commands in a certain category.