sv_damage_print_enable
Sv_damage_print_enable 1: If you open the console when you activate the command, you can see the relevant damage details after death. This damage detail is only visible at the end of the round.
Sv_damage_print_enable 2: Damage taken and dealt are only shown when the next round is restarted.
There were some very serious radical changes in the transition from CSGO to CS2. We can say that tick rate, graphics, weapons, and even console commands have changed. For example, while countless commands worked in CSGO, some commands were deleted and became ineffective in CS2. We will examine one of these commands, “sv_damage_print_enable”, in full detail in our article. In this way, you will be able to easily understand whether the CS GO show damage in chat command works or not.
Of course, we want to do our exact test for this. We will head over to CS2 and use the commands to see if we can see the damage we inflict on the opponent. Now if you are ready, let’s get started and first enable the console commands and take a look at the details of our article.
How to Enable CS2 Console Commands?
If you want to start using commands in CS2, you must first enable the console. Otherwise, you cannot run any commands. Let’s take a look at how to activate the console without further ado.
- First of all, the first thing you need to do is open CS2 via Steam.
- After logging into the game, you will see the “the cog” button at the top left of the home page. After clicking this button, you will see all the settings menu of the game.
- You must enter the “Game” section from the opened settings menu and check the “Enable Developer Console” option as “Yes“.
Naturally, doing this is enough to activate the console. Additionally, the shortcut key is [“] by default. If you want to change this button, you can click the button on the settings section where you activate the console. Then, you can make the key assignment that suits you best and enter the game. You can try the commands we will explain one by one by pressing the button you have selected in the game.
What Does the sv_damage_print_enable Command Do?
Players often wonder how much damage they did to their opponents at the end of each round and, most importantly, how much damage they received. Unfortunately, in the past, it was sufficient to use console commands for such a setting in CSGO. However, we can say that this system has completely changed in CS2.
However, after an update to CS2, this command became completely ineffective. You can no longer see the hit and received damage values on the console. We will still share the details of this command with you. You can probably actively use the command on the servers you have opened yourself to practice.
That’s exactly what you can do on the console to see the damage done in CS2. Unfortunately, as in CSGO, it is impossible to use this command in CS2, as we have just stated. However, although the console commands do not work, it is still possible to see the damage details with some techniques.
Is CS GO Show Damage In Chat Possible?
There are certain options to see the damage you deal and receive in CS. While some of these are third-party tools, some are features of the game itself. If you’re just starting out, you probably still can’t see how much damage you’ve dealt to opponents. We will talk about 3 different methods that can help you with this.
Wait for the End of the Tour
First of all, we would like to talk about a feature that has been newly added to the game with CS2. When you enter any premier or competitive game, at the end of each round, you can see how much damage you have dealt to whom. It will be enough to look at the top middle of the home screen, just below the section where the avatars are located.
Here, you will see two numbers and two colors. The first number, the green number, shows the damage and number of bullets you hit that opponent. For example, if you see a number such as 57 in 4 in green, it means that you dealt 57 damage with 4 bullets. The second detail, shown in black, shows the damage and number of bullets you received from your opponents.
Under normal circumstances, you cannot receive instant damage data from the game in CS2. Likewise, when the game is completely over, you can see how much damage all players have dealt, one by one. However, since this situation does not occur in the middle of the game, it can be dysfunctional.
Check Your End-of-Match ADR
When a match ends in CS2, you will see a special section with the statistics of the entire team. Here, you can see which weapon your teammates play best with, how many people they hit, and most importantly, how much damage count they have. We think that the ADR number in this section is important in terms of the CS GO show damage in chat question.
ADR, in longer words, means “average damage per round”. With ADR, it is very easy to understand the damage each player deals to opponents per turn. It is possible to say that players with high ADR generally participate in conflicts more and come into contact with the enemy more frequently. That’s why we recommend that you constantly check your ADR value at the end of each match.
Use Faceit
Faceit is a platform that has been offering an advanced matchmaking system in CSGO and CS2 for a long time. You can download the application with one click and install it on your computer. Most professional players use Faceit because it is completely legal. The fact that Faceit is a third-party software enables the use of many features that are not active in CS2. The most important of these is the extremely efficient use of the CS GO show damage in chat feature.
For example, at the end of any round, the damage you have received and dealt is automatically shown in green in the chat. Moreover, you do not need to make any special settings for this. All you have to do is start your competitive matches via Faceit. Then, at the end of each round, you will be able to see the damage you have dealth to the opponent clearly.
At this point, we strongly recommend you use Faceit. As a matter of fact, Faceit provides both a fairer matching opportunity and the ability to see the damage. Therefore, you can get a more enjoyable CS2 experience by downloading Faceit for free and installing it in seconds.
External Software and Tools
Since the ”sv_damage_pring_enable” command was removed in CS2, everyone has been looking for methods to see the damage count at the end of the round. Some software developers seem to have found a solution to this problem by designing various tools on GitHub. However, using such tools puts your personal computer at risk and may cause you to be banned because Valve absolutely does not allow the use of such programs.
However, the fact that damage done at the end of the round can be reflected in the chat via Faceit may create confusion. Especially the fact that Faceit can be used as a third-party software means that it can be used in other external software. However, as we mentioned, the application of these methods is extremely risky and troublesome.
If you are experienced with coding or running different tools on Windows, you can test such tools. To do this, all you have to do is log in to Google and search for “GitHub CS2 show damage”. Then, you will see many external software that you can use. By the way, we would like to remind you that not all these tools work in premier and competitive mode.
Conclusion
Today, we talked about some methods you can pay attention to regarding CS GO show damage in chat. Two of these methods are already seen as active in the game itself. Many beginner players may overlook this feature because they are not completely familiar with the interface. Likewise, we explained in detail how using Faceit simply shows the damage you have received and dealt.
Most importantly, we think we can clearly say the command that used to work but was disabled after switching to CS2. We hope that our article helped you clearly see the damage you caused at the end of the tour.