game_mode Command Help & Examples

Did you know there are 15 game modes available in CS:GO and CS2? From the classic Casual and Competitive to Wingman, Demolition, Deathmatch and War Games, you can access them all thanks to the game_mode command.

On this page, we will teach you what the game_mode command is and how you can use it to select any game mode of your choice. Especially useful if you have grown tired of the typical casual matches and you want to go where the grass is greener, we will show you how to accomplish it by using the game_mode command.

Furthermore, we will also bring you examples on how to access any of the 15 game modes when using the game_mode command via the console, so you can start using it as soon as possible and learn how to change gamemode in CSGO console.

What is the game_mode Command?

The game_mode command can only be used in conjunction with game_type, as it’s a rule set by its syntax. It’s the unique way by which you can access any of the 15 game modes available such as Competitive, Deathmatch, Demolition and Skirmish.

This command only accepts numeric arguments, and you can place them next to the command, for example “game_mode 0” and enter it directly via the console. However, it will only take effect by entering the “game_type” along with it. It’s essential to learn its syntax, so you can use it properly and without complications.

You can use this command by placing it before game_type or vice versa. For example, entering it like this: game_mode 0; game_type 0, or game_type 0; game_mode 0, will have the same effect, and it will set the game mode to Casual.

It’s critical to learn all the combinations for using this command properly, so you can launch your desired game mode easily. This is why we have built a table with all of them, so you can refer to it when you want to launch a specific game mode for playing CS:GO (CS2):

In the next sections, we will show you how to use the command in each one of these 15  combinations, so you can launch your preferred game mode instantly. Be it launching War Games, Demolition, Danger Zone, or resetting it back to Casual, we will guide you step by step.

Remember, you can only use this command when creating your own game, if you are the server host or if you have admin rights. 

You can use this command directly via the command, without activating sv_cheats beforehand. The only requirement is using it along the game_type command, so you can launch it without problems.

Since it’s clear what this command is, how it works, what are its limitations and the game modes you can launch thanks to it, it’s time to see how you can use it via the command, so you can start implementing it right off the bat.

How to Use the game_mode Command

Now, let’s see how you can use the game_mode command to select any of the 15 available game modes on CS:GO and CS2:

1. Press the key “~” to launch the console
2. Type in the command game_mode #; game_type #
3. Press enter
4. The command will select your preferred game mode instantly

You need to replace “#” for each one of the corresponding values to select your preferred game mode. For example, if you want to select the Deathmatch game mode, you’d need to input the command like this: game_mode 2; game_type 1. Upon inputting it like this in the console, the game will become Deathmatch instantly.

As we mentioned previously, it’s essential to use both commands together, otherwise game_mode alone won’t work. For example, if you wanted to set the game mode to Casual, and you input the command “game_mode 0”, it would not work. You’d need to input it like this: game_mode 0; game_type 0.

This is why we have created a table with all the available game modes for CS:GO and CS2, along with the combinations you need to use to launch each one via the console. Therefore, refer to it anytime you want to switch from a game mode to another.

Furthermore, we have also created a complete section full of examples, so you can learn how to select any of the 15 game modes by using the game_mode command. Check it out below to get started.

Examples on How to Use the game_mode Command

Now, let’s check examples on how you can use the game_mode command to launch any of the 15 game modes available. We will guide you step by step so you can achieve the desired results right off the bat.

How to launch Casual game mode

If you want to launch the Casual game mode, you only need to input the command like this via console: game_mode 0; game_type 0. Upon inputting it via console and pressing enter, you will be able to play the game in Casual mode. It’s also the way to reset the command back to default.

How to launch Competitive game mode

If you want to play Competitive CS:GO or CS2, you only need to use the command like this via the console: game_mode 1; game_type 0. Simply press enter and it will take effect immediately, turning the match into Competitive instantly.

How to launch Wingman game mode

If you would like to set up the game mode with the mythical Wingman, so you can play with your friends, you only need to use the command like this: game_mode 2; game_type 0. Simply type it in, press enter and you will be able to play CS:GO or CS2 or in the Wingman mode.

How to launch Weapons Expert game mode

If you want to play this exclusive game mode launched in operation Hydra in 2017, all you need to do is to use the command like this: game_mode 3; game_type 0. Upon inputting it via console and pressing enter, you will be able to play Weapons Expert with your friends.

How to launch Training Day game mode

Even though most users would like to skip it, if you want to launch the game with the Training Day mode, you can do it by inputting the command like this: game_mode 4; game_type 0. It will take effect immediately, allowing you to play 12 rounds against bots.

How to launch Arms Race game mode

If you want to play this fun game mode to see who of your friends will get a kill with the Golden Knife, you just need to input the command via console like this: game_mode 0; game_type 1. It will enable this game mode automatically, altering the mechanics of the match so you can enjoy the flow of Arms Rance.

How to launch Demolition game mode

If you are a fan of the Demolition game mode, and you would like to activate it in your server or match, you can do it by using the command like this: game_mode 1; game_type 1. After inputting it, just press enter and now the gameplay experience and flow will change accordingly.

How to launch Deathmatch game mode

If you would like to play the famous and exciting Deathmatch game mode on your own server or private match, you can do it by using the command like this: game_mode 2; game_type 1. Next, just press enter and this game mode will be activated, so you can start playing it.

How to launch Training game mode

If you want to play in Training game mode, you can access it by inputting the command like this: game_mode 0; game_type 2. Upon inputting it and clicking enter, the game mode will become Training, so you can play under its gameplay flow and rules.

How to launch Custom game mode

If you want to launch any custom game mode, and hence you need an empty game mode to play around with, you only need to use the command like this: game_mode 0; game_type 3. Upon clicking enter, you will get this blank canvas of a game mode to do as you please.

How to launch Guardian game mode

If you would like to play under the flow and rules of Guardian, you only need to use the following combination via the console: game_mode 0; game_type 4. This will activate the Guardian game mode, automatically setting up the match like this.

How to launch Co-op Strike game mode

If you would like to play a mission with another player, in a custom or special map, you can launch the Co-op Strike game mode by using the command like this: game_mode 1; game_type 4. Just press enter and you will be able to play any special mission under the rules of this exclusive game mode.

How to launch War Games game mode

If you want to launch the War Games game mode, you need to use the command like this: game_mode 0; game_type 5. This will activate this special game mode automatically, so you can adapt the game as you wish.

How to launch Danger Zone game mode

If you want to play Danger Zone, all you need to do is to input the command like this and press enter: game_mode 0; game_type 6. However, remember that you can only play this game mode in maps especially designed for it, otherwise the command won’t work.

How to launch Workshop game mode

Only available in CS2, if you want to launch the Workshop game mode, you need to use the following combination: game_mode 0; game_type 7. Just press enter and it will take effect immediately, allowing you to play any of the Workshop maps available for CS2.