All CS2/CSGO Commands List
Below is CSDB's searchable list of all CS2 console commands. Each command in our database has in-depth insights on each command, with help and argument details (simply hover over a command to view).
m_side
m_side
<Side Factor>
This command is used to set the mouse side factor.
Name:
Side Factor
Description:
The side factor in which you would use. The default value for this command is 0.8.
m_forward
m_forward
<Value>
This command is used to set the mouse forwarding factor.
Name:
Value
Description:
The forwarding factor you want to use for your mouse forwarding can be set anywhere from 0.0001 to 1,000. The default value is set at 1.
m_yaw
m_yaw
<X sensitivity>
The m_yaw console command is used to adjust your mouse sensitivity. Specifically only on the X axis, which allows you to look left and right.
Name:
X sensitivity
Description:
This is the specific sensitivity that you wish to use. This command will adjust how fast you can move when looking left or right. To edit the Y axis you will need to use the m_pitch command.
sensitivity
sensitivity
<Sensitivity>
This command will set your mouse sensitivity to the inputted value.
Name:
Sensitivity
Description:
Your mouse sensitivity the default value is 2.5
m_rawinput
m_rawinput
<0 / 1>
This command allows you to enable raw input directly from your mouse. If raw input is enabled, input is then taken from your mouse and will ignore settings from other applications.
Name:
0 / 1
Description:
Input a 0 after this command to turn off the raw input feature, add a 1 to enable raw input which is the default value,
m_customaccel
m_customaccel
<0 / 1 / 2 / 3>
This command is used to select what level of custom mouse acceleration you have.
Name:
0 / 1 / 2 / 3
Description:
0 - Turns off custom mouse acceleration
1 - Turns on custom mouse acceleration
2 - Will use custom mouse acceleration but will use the inputs from the X and Y axes, which is set by the m_pith command
3 - Will turn off mouse acceleration but will be affected by your in-game sensitivity.
1 - Turns on custom mouse acceleration
2 - Will use custom mouse acceleration but will use the inputs from the X and Y axes, which is set by the m_pith command
3 - Will turn off mouse acceleration but will be affected by your in-game sensitivity.
m_customaccel_scale
m_customaccel_scale
<Scale>
Scales up or down the acceleration rate.
Name:
Scale
Description:
This is how high or low you can set your mouse acceleration.
m_customaccel_max
m_customaccel_max
<Max Point>
Sets the maximum limit for the movement speed of the mouse.
Name:
Max Point
Description:
This value is used to use a cut-off point when moving your mouse in the game. The default value for this is 0.
m_customaccel_exponent
m_customaccel_exponent
<Start Point>
This sets a threshold for acceleration speed.
Name:
Start Point
Description:
This value will indicate when your mouse acceleration will begin to speed up your mouse. The higher this command is set. The default value for this command is 1.05.
Show entries:
Above is CSDB’s searchable list of all CS2 console commands. Each command in our database has in-depth insights on each command, with help and argument details (simply hover over a command to view).
You can type in the name of a specific command to filter that command.
We also have a Command category making it easier for those looking for CSGO commands in a certain category.