Rip CS2 Settings: Full Config, Crosshair & Peripherals

Rip Mouse Settings

Rip is mostly wielding rifles when playing Counter-Strike 2, and to be as precise as possible, he needs solid mouse settings put in place. If you want to play like him, then copying these settings is important.

Overall, his DPI is set to 800 which can be considered standard. However, his effective DPI is very low which may take some time to get used to. Also, movement can be quite clumsy with this sensitivity, but your aim is going to be on point.

Rip Crosshair Settings

Alongside his mouse settings, we also need to touch base on Rip’s crosshair settings as we are well-aware of how important a good crosshair is, especially for riflers. Here are the details.

Rip is using a big crosshair, especially once compared to CS2 professionals. The crosshair length is set to 2 while the gap is set to -2. Also, a yellow crosshair can be tricky to use on certain maps as it blends with map colors.

Rip Crosshair Code

To ease you into the process of copying Rip crosshair, we have prepared a code that you can use to get started with just a couple of clicks and give his crosshair a chance.

Rip Viewmodel Settings

Yet another aspect of Rip options revolves around viewmodel settings. The fact is, with a solid viewmodel, you can get much more information as you will see more of the screen allowing you to react on time and be prepared for dangerous situations in the game.

The fact is, Rip did not tamper much with the viewmodel settings. We can see that he is using a maximum FOV of 68 while the offsets are quite usual once compared to default settings. All in all, you will not see much difference if you do not differ from the default viewmodel options.

Rip Viewmodel Config

If you like what you have seen from Rip’s viewmodel settings, then we suggest copying the following list of commands and pasting it into the CS2 console to get the exact same settings with a single press of the button.

Rip Video Settings

Up next, we will go over the video settings Rip is using right now.

Rip Resolution and Aspect Ratio

The most important video settings revolve around resolution and aspect ration. Refer to the list below to find more information about the values Rip is using.

Right from the get-go, we can see that he is sticking with the default options regarding resolution which is set to 1920×1080. On top of that, the aspect ratio is also set to default, 16:9 to be more precise. Unlike the majority of professional players, Rip brightness settings are set to just 103%.

Rip Advanced Video Settings

If you want your screen to look exactly the same as Rip’s, then it is important to go over the advanced video settings this content creator has put in place. Check out the values below for more information.

Usually, players sticking with the native resolution and 16:9 aspect ratio are also playing on high settings. However, this is not the case with Rip. As you can see from the available settings, his Multisampling Anti-Aliasing Mode is very low just like Texture Filtering Mode.

Rip Radar Settings

At the time of writing, Rip did not disclose any of his radar settings. But, generally speaking, we can confirm that he is sticking with the industry-standard majority of other CS2 professionals are rolling with.

Rip Peripherals

Lastly, we should also address Rip’s peripherals as without quality gaming gear, it is hard to reach his level. Check out the list below for more information about this topic.

Overall, Rip enjoys playing with Logitech gear and we completely agree with his choice. Alongside the Logitech G Pro X Superlight mouse, he also likes the Logitech keyboard and headset.