Guides

How To 1v1 In CS:GO

How To 1v1 In CS:GO

Aiming is probably the most important skill you will need in Counter-Strike, and proof of your progress is being able to sit an enemy player down in a good ol’ one versus one. If you’re looking to improve your aiming skills, one of the best ways to do so is to call up your friend and invite them to a 1v1.

In a CSGO 1v1, you will play on a map created specifically for this game mode, where you will have boxes and platforms to play around, and the player with the best aim and movement skills will come out victorious. Now, let’s teach you how you can set up a 1v1 in CSGO. 

How To 1v1 In CS:GO [Step-by-Step Guide]

In this portion of the article, we’re going to guide you through the entire step-by-step process of starting a 1v1 server and playing the game mode. 

Step 1: Turn On The Developer Console

Before we get into the actual procedure of booting up a 1v1 server, we must ensure that your developer console is enabled, since it will be required later. 

To turn on your developer console, follow the steps below:

  1. Open Counter-Strike and then go to your in-game Settings menu.
  2. Under the different categories, go to the “Game” category.
  3. The first setting you should see should be “Enable Developer Console.”
  4. Change it from “Yes” to “No”.

Once you have enabled the console, you can press your tilde key (~) to open and close it. 

Step 2: Prepare A 1v1 Map To Play On

Next, it is important to also prepare a suitable 1v1 to play on. Normally, you can always use one of the maps from the Active Duty Map Pool, but they aren’t the best for raw 1v1 aim duels. 

There are 1v1 maps in the game that were created solely for the 1v1 game mode. These maps have boxes, ramps, and other obstacles on both sides to help players hide and position themselves accordingly. 

For recommendations of 1v1 maps, continue reading the article as we’ll mention a few!

Step 3: Form A Party With Your Friend

Now that the console and map are set up, you will have to create a party with your friend or 1v1 partner. Invite them into a party like you normally would. Look for their name on your Friend List, left-click it, and then invite them to your party. 

Step 4: Load Into A Private Server

Once your friend or partner has joined the party, you can start loading into your private server.

Here’s how you can load into a private server:

  1. Click on the “Play” button.
  2. Instead of Matchmaking or other game modes, select “Workshop Maps.”
  3. Then, select the map you have downloaded to play the 1v1 game mode.
  4. After selecting your desired map, click on the green “Go” button.

Now, you will begin loading into the map first. Your friend must wait for you to load in, so expect them to have slight delays upon joining.

Remember that you will be the host of the server, meaning you will have 0 ping on the server. Your friend’s connection will depend on your internet strength and how far he is from your location. 

Step 5: Use The Required 1v1 Commands

To make the 1v1 experience much better, we highly recommend using a set of console commands. These commands are very useful when it comes to giving players infinite ammunition, additional round time, less waiting time, and much more. You can see a full list of CS:GO 1v1 commands later in the article!

Step 6: Restart The Game

After you have used your desired 1v1 CS:GO commands, the last thing to do is to restart the game. Restarting the game is crucial as your commands will not be applied if the game is not restarted. 

To restart the game, you can use the command “mp_restartgame 1” in your developer console. Additionally, you can use the same command if you want to restart the score back down to 0-0. 

1v1 CS:GO Commands To Use

The 1v1 experience without the use of console commands can get pretty messy, which is why we recommend using the best CS:GO 1v1 commands to enhance your gaming experience.

These CS:GO 1v1 commands serve various purposes such as reducing the waiting time, giving free armor, providing infinite ammo, and much more.

Here is a table with the best 1v1 CS:GO commands you should consider using:

Command Use
sv_cheats 1 This command will enable cheat commands on the server.
mp_freezetime 2 This command will reduce the freeze time (round start time) from the regular 15 seconds to 2 seconds, saving a lot of time.
mp_free armor 1 This command grants all players on the server with full armor (Vest + Helmet)
mp_round_restart_delay 3 This command reduces the round restart delay (round end time) from the regular 7 seconds to 3 seconds, saving a lot of time. 
mp_roundtime 60 This command changes the round time from the regular 1 minute and 55 seconds to 60 minutes. 
mp_overtime_enable 1 This command enables overtime, which will trigger in case of a draw. 
sv_infinite_ammo 2 This command is used to give all players on the server infinite ammunition in their magazine. 
sv_alltalk 1 This command allows teams from opposing sides to talk to each other using the Counter-Strike voice chat feature.
sv_deadtalk 1 This command allows alive players to hear the voice comms for dead players.
mp_warmup_end 1 This command is used to end the annoying 5-minute warmup timer that often appears in games.
mp_restartgame 1 This command restarts the game, resetting the score back to 0-0. This command is also required to ensure all commands above work. 

CS:GO 1v1 Commands Config

If you want the easy way out, you can copy and paste all of these commands into your console to enable them all at once:

sv_cheats 1; mp_freezetime 2; mp_free_armor 1; mp_round_restart_delay 3; mp_roundtime 60; mp_overtime_enable 1; sv_infinite_ammo 2; sv_alltalk 1; sv_deadtalk 1; mp_warmup_end 1; mp_restartgame 1

Finding The Best 1v1 CS:GO Maps

As mentioned in the step-by-step guide, it is preferred that you play against your friend using a 1v1 map instead of one of the maps in the Active Duty Pool. By utilizing 1v1 maps, you are putting all your chips on your aim, and a little bit of understanding of your surroundings.

Playing a 1v1 on an actual CSGO map is very time consuming as you must walk around the map to take your duels. Instead, you can have a fast-paced 1v1 match using a workshop map you can download for free.

How To Find And Download 1v1 Maps

The primary way to find 1v1 maps to download is by going to the Steam Community Workshop, which can be found directly in the Steam desktop client or the official Steam website. 

Here’s how you can navigate to the Steam Workshop and download maps:

  1. On the Steam client or website, hover over the “Community” tab at the top of your screen.
  2. Once you see the drop-down menu, click on “Workshop.”
  3. Next, select Counter-Strike as your game of choice. 
  4. Now, you can use the search bar to look for maps. To filter down to 1v1 maps, use the keywords “1v1” or “aim.”
  5. Once you have found a map, go to its page and then hit the green “Subscribe” button. The map will automatically download.
  6. Restart Counter-Strike and check to see if the map has been downloaded successfully. 

1v1 Map Recommendations

There are a bunch of 1v1 maps you can download for free on the Steam Community Workshop. If you don’t know which ones to download, you can refer to these maps below:

  • aim_map: This is the classic 1v1 map used by professional players when they want to style the score with a 1v1. This map has been out since Counter-Strike 1.6, and remains very popular and functional.
  • aim_redline: The aim_redline map is a more modern map, featuring bright lights and clean designs. The distance between both sides is further than aim_map, requiring more skill and precision from both players.
  • awp_india: If you are looking to 1v1 your friend using the AWP, you can use awp_india, which is arguably the best 1v1 map if you’re looking to train with the sniper rifle. You will spawn very far away from each other and have obstacles to play around. 

Using CS:GO 1v1 Commands

Here is a table showcasing the best 1v1 CS:GO commands you can use to enhance your 1v1 experience with your friend!

Joining 1v1 Community Servers

Unfortunately, some players might have a hard time finding a friend to play a 1v1 against. Normally, it is difficult because there is a massive skill gap between you and your friend that a 1v1 match will only be one-sided for one player. 

If you are struggling to have a competitive 1v1 game against your friend, you can always try finding better opponents by joining 1v1 community servers. 

Community servers are non-official Valve servers that are hosted and actively played on by a group of players. There are numerous genres of community servers, and 1v1 servers are one of the most prominent categories. 

These 1v1 servers are geared up with console commands and plugins that are useful for the 1v1 game mode. Most 1v1 servers have “arenas,” where players can climb up to play against the best players on the server, and drop down if they lose a 1v1 round. This ensures you will likely be matched against players of your own caliber. 

To join a 1v1 community server, follow the steps below:

  1. Launch Counter-Strike and hit the “Play” button.
  2. Next, click on the “Browse Community Servers” button, which appears in the form of a globe. 
  3. Here, you will see a list of game servers you can join. 
  4. Use the search bar to filter your results, using the keyword “1v1” or something similar.
  5. Once you have found a server, simply double-click to join.
Rate this article

0 / 5. 0

Popular article
Guides
Guides
Guides